320
Precor Icarian Dip Chin Assist 320
Pre-owned, this unit is cleaned, serviced and ready to go! Excellent Condition!
The Dip/Chin Assist modular station can be used in an Icarian® modular system as a plug-in station or as part of a tandem modular core. Oversized steps, a comfortable knee pad, rotating dip handles and multiple-position pull-up handles are part of the highly versatile Dip/Chin Assist. The knee pad flips up out of the way for unassisted exercises. A linear bearing mechanism assures smoothness and durability.
This item does not ship free. Please call or email for a shipping quote before you purchase the machine.
Icarian Series Strength Line Manual
Equipment Features
| Standard Features | Flip-down Knee Pad |
| Upholstery | Premium-quality upholstery with Beautyguard protective topcoat finish. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Double-layer slipcover in appropriate high wear areas. Double stitching on all seams. |
| Frame and Finish | 11 gauge (.120"") and 7 gauge (.188"") 2x4-inch bent electroweld steel tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat. |
Equipment Specifications
| Weight Stack Standard | 200 lb / 91 kg |
| Standard Frame Colors | Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl |
| Stocked Upholstery Colors | All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate |
Equipment Dimensions and Weight
| Length | 61 inches / 155 cm |
| Width | 54 inches / 137 cm |
| Height | 93 inches / 236 cm |
| Equipment Weight | 635 lb / 289 kg |
Pivoting Arms
The dual pivoting arms allow for users of different arm lengths to comfortably perform each exercise while maintaining proper form.
Independent Movement Arms
Independent movement arms provide a variety of movements on one unit, while increasing core activity.
Equipment Features
| Instructional placard | Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. |
| Upholstery | Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. |
| Rubber Feet | Yes |
| Adjustments | Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease of use. |
| Water Bottle and Accessories Holder | The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. |
| Bearings and Pivot Points | Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. |
| Pulleys and Cables | Glass-fiber reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference. |
| Frame and Finish | The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. |
| General Features | Dual independent-movement arms feature upper pivots to accommodate arm lengths and can be set to 13 starting positions over a 120-degree range. Weight stack offset to user's right for the most convenient access. Weight Stack 109 kg (240 lb). |
Equipment Specifications
| Incremental Add-on Weight | 5 lb / 2.3 kg |
| Standard Shroud Color | Pacific Blue Black |
| Weight Stack (kg/lb) | 240 lb / 109 kg |
| Workout Area (L x W) | 208 L x 208 W / 82 L x 82 W |
| Standard Frame Colors |
Gloss Metallic Silver |
| Stocked Upholstery Colors | All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate |
Weight Stack(s)
| Weight Stack(s) | Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. |
Equipment Dimensions & Weight
| Length | 54 inches / 137 cm |
| Width | 56 inches / 142 cm |
| Height | 84 inches / 213 cm |
| Equipment Weight | 594 lb. / 269 kg |
Delivery Dimensions & Weight
| Delivery Weight | 655 / 297 |
Regulatory
| EN957 | EN957 |
| ASTM | Yes |
This item does not ship free. Please call or email for a shipping quote before you purchase the machine.