DSL0605
Precor Leg Extension DSL0605
Pre-owned, this unit is cleaned, serviced and ready to go!
The start position, roller pad, and spring-assisted back pad on the Discovery™ Series Pin Selected Line Leg Extension adjust easily from the seated position, providing a comfortable fit and supporting proper exercise mechanics.
Features:
Equipment Features
| Instructional placard | Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. |
| Upholstery | Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. |
| Rubber Feet | Yes |
| Adjustments | Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. |
| Water Bottle and Accessories Holder | The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. |
| Bearings and Pivot Points | Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. |
| Pulleys and Cables | Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. |
| Frame and Finish | The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. |
| General Features | Knee pad moves with user's lower legs; no thigh hold-down pad required. Start position and roller pads adjust for optimal exercise mechanics. Weight Stack 109 kg (240 lb). |
Equipment Specifications
| Incremental Add-on Weight | 5 lb / 2.3 kg |
| Standard Shroud Colour | Pacific Blue Black |
| Weight Stack (kg/lb) | 240 lb / 109 kg |
| Workout Area (L x W) | 201 L x 127 W / 79 L x 50 W |
| Standard Frame Colours |
Gloss Metallic Silver |
| Stocked Upholstery Colours | All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate |
Weight Stack(s)
| Weight Stack(s) | Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. |
Equipment Dimensions & Weight
| Length | 61 inches / 155 cm |
| Width | 49 inches / 125 cm |
| Height | 59 inches / 150 cm |
| Equipment Weight | 594 lb / 269 kg |
Delivery Dimensions & Weight
| Delivery Weight | 645 / 293 |
Regulatory
| EN957 | EN957 |
| ASTM | Yes |
Easy Back Adjustment
The spring-assisted back pad easily adjusts from the seated position so the exerciser can properly set up the unit while seated.
Personalised Fit
Both the start position and roller pad easily adjust to ensure the unit fits the exerciser for proper form throughout the exercise.
Exerciser-Friendly Weight Stack
The weight stack uses a simple pin adjustment that exercisers can easily reach from the seated position.
Equipment Features
| Instructional placard | Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. |
| Upholstery | Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. |
| Rubber Feet | Yes |
| Adjustments | Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. |
| Water Bottle and Accessories Holder | The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. |
| Bearings and Pivot Points | Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. |
| Pulleys and Cables | Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. |
| Frame and Finish | The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. |
| General Features | Spring-assisted back pad adjusts easily from seated position. Start position and roller pad adjust for optimal exercise mechanics. Weight Stack 109 kg (240 lb). |
Equipment Specifications
| Incremental Add-on Weight | 5 lb / 2.3 kg |
| Standard Shroud Colour | Pacific Blue Black |
| Weight Stack (kg/lb) | 240 lb / 109 kg |
| Workout Area (L x W) | 168 L x 127 W / 66 L x 50 W |
| Standard Frame Colours |
Gloss Metallic Silver |
| Stocked Upholstery Colours | All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate |
Weight Stack(s)
| Weight Stack(s) | Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. |
Equipment Dimensions & Weight
| Length | 53 inches / 135 cm |
| Width | 49 inches / 125 cm |
| Height | 59 inches / 150 cm |
| Equipment Weight | 575 lb / 261 kg |
Delivery Dimensions & Weight
| Delivery Weight | 625 / 283 |
Regulatory
| EN957 | EN957 |
| ASTM | Yes |