CFF Pull-Up Bar Replacement Hardware
Complete Kit | Bolts, Anchors, Washers Included
Lost Your Mounting Hardware? We’ve Got You.
Need replacement mounting hardware for your wall mounted pull-up bar? If you lost it, moved, or just want fresh hardware, no need to run to the store and guess what you need. Here is the complete kit with bolts and anchors spec’d for CFF wall mount bars.
Skip the hardware store guesswork. Get the exact M10 bolts, lag screws, anchors, and washers that fit your bar.
What’s Included - Complete Kit
🔩 M10 Lag Screws
8 pcs M10 x 80mm hex lag screws for wood stud mounting.
🧱 Plastic Wall Anchors
8 pcs M10 x 62mm anchors for masonry, brick, or concrete.
⚫ Black Oxide Bolts
4 pcs M10-1.5 x 75mm hex bolts, partially threaded, grade 8.8.
⚙️ Nuts & Washers
4 black oxide nuts + 9 chrome washers + 9 black oxide washers.
Hardware Specifications
| Hex Lag Screws | 8 pcs - M10 x 80mm - For wood studs |
| Wall Anchors | 8 pcs - M10 x 62mm plastic - For masonry/concrete |
| Hex Bolts | 4 pcs - M10-1.5 x 75mm black oxide - Partially threaded 8.8 |
| Nuts | 4 pcs - M10-1.5 black oxide |
| Washers | 9 pcs M10 Chrome + 9 pcs M10 Black Oxide |
| Compatible With | Wood studs 16"/24", Masonry, Brick, Concrete |
When You Need This Kit
- Lost Hardware: Moved and can’t find the mounting bolts
- New Install Surface: Switching from wood to masonry or vice versa
- Preventative Replacement: Upgrade old or rusted hardware
- Second Location: Install your bar at a second home or gym
Frequently Asked Questions
What size bolts for wall mounted pull-up bar?
This kit includes M10 x 80mm hex lag screws for wood studs and M10-1.5 x 75mm black oxide hex bolts for through-bolting. Also includes M10 x 62mm plastic anchors for masonry. All hardware is M10 thread size.
Do I need lag screws or anchors for my pull-up bar?
Use M10 x 80mm lag screws for wood studs. Use M10 x 62mm plastic anchors for masonry, brick, or concrete. This kit includes both so you’re covered for either surface. Never mount to drywall alone.
How many bolts do I need to mount a pull-up bar?
CFF wall mount bars use 8 mounting points. This kit provides 8 lag screws + 8 anchors, plus 4 hex bolts and 4 nuts for the bar assembly. You also get 18 washers total: 9 chrome, 9 black oxide.
Will this hardware fit other brand pull-up bars?
This kit is spec’d for CFF wall mounted bars using M10 hardware. It may fit other brands that use M10 / 3/8" mounting holes. Check your bar’s bolt hole diameter before ordering. All hardware is grade 8.8 or equivalent.
Installation: Always mount to structural wood studs 16" or 24" on center, or masonry/concrete. Use a stud finder. Pre-drill pilot holes for lag screws. Torque bolts evenly. Inspect hardware annually.
Stop Guessing. Get The Right Hardware.
Complete M10 kit. Wood & masonry included. Ships fast.
BOLTS | ANCHORS | WASHERS | COMPLETE KIT
